I built this sim back in 2000, it had 3 axis motion, I was on a budget and only had one Pentium 1 and two 486 computers with FS 98. I made my own 5/3 valves and ran the cylinders on air. Motion cues were supplied directly from control input, Although it was fun, pnuematic systems are not that successful, I also decided that direct control input was not the way to do it, but I had absolutely no idea of how to make the computer send motion cues out so I shelved the motion idea. The sim was dismantled and scraped late 2001, due to relocation. A replacement was always on my mind........!
 |
 |
 |
 |
 |
 |
 |
 |